Everyone is familiar with plywood. Nowadays, most of the furniture we use in our daily lives is made of it. Its beauty is no less than solid wood furniture, and it also improves the utilization rate of wood, saves costs, and is now very popular. Using a rotary cutting machine to rotate and cut wooden strips, giving them high mechanical strength, indirectly affecting their product quality. Due to the varying thickness of plywood required by different customers, plywood manufacturers are required to make adjustments based on the actual situation.

Many users do not know how to control the thickness of the veneer, but in fact, the thickness of the rotary cutting machine is set to 1-2 millimeters before leaving the factory. If you want to change the thickness of the veneer in the later stage, you need to adjust the pressure of the machine. If you cannot adjust it yourself, you can contact Jinlun Machinery and we will come to your door to adjust it. How can you adjust it yourself? Let's take a look together below.

In general, the thickness of the rotary cutting machine is 1-2mm before leaving the factory. If the thickness of the veneer needs to be changed later, the pressure of the rotary cutting machine must be adjusted first. At the upper end of the double Steamed rolls, use a triangular ruler to place the double rosette on the rotary cutting machine, and use a 150 mm ruler to top the single Steamed rolls. Observe the value at the intersection of the lower edge of the triangular ruler and the ruler. When the leather thickness is 1 to 2 mm, take 35-36 mm. If the leather thickness is less than 1 mm, take 35-36 mm. When the leather thickness is more than 2 mm, the reading will decrease accordingly. If you want to increase the rotary cutting pressure, you need to add a shim between the two veneers and the shoulder of the cutting table. When reducing the pressure, reduce the shim.

 翻译效果如何